Pilot Stargazer Fountain Pen Review - F Nib

The Pilot Stargazer fountain pen is one I've wanted to review for awhile and is one that I feel doesn't get a whole lot of exposure.  If it weren't for Keegan from One Star Leather Goods telling me about it nearly a year ago I probably wouldn't have even taken notice!

Pilot Stargazer Fountain Pen Review

The Stargazer stands out in Pilot's lineup not only due to its super awesome name, but also for its size.  It is very small in comparison to some of its counterparts, but I wouldn't quite put it in the category of being a "pocket pen".  If you are familiar with the Prera, it runs just slightly smaller, which makes it quite petite.

Pilot Stargazer Fountain Pen Review

The first time you pick up the Stargazer, one thing that takes you by surprise is the weight of it.  Unlike the nearly all-plastic Prera which is extremely light, the Stargazer barrel and cap are mostly made of metal which provides some considerable heft.  Its like picking up a little kid that you think will be light due to their size, but then they feel like a tank.  I would say this adds a point or two to the scoreboard for the Stargazer as it creates a sense of perceived quality like it isn't going to fall apart.

Pilot Stargazer Fountain Pen Review

I picked up this pen from Pen Chalet and received great service as always.  They have such a great selection!

Pilot Stargazer Fountain Pen Review

The barrel is coated in what appears to be a lacquer or enamel of some kind which creates a shiny and glossy finish which looks great.  Again, adds a bit to the curb appeal of the pen.  

Pilot Stargazer Fountain Pen Review

The downside to this finish is that it also makes the pen surface very slick.  With the small size, a slick and smooth surface mixed with large hands (or if you are prone to sweaty hands) makes the pen slightly difficult to hold.  Writing hasn't been uncomfortable, but the finish and size do not create an ideal size for my hand I think.   

Pilot Stargazer Fountain Pen Review

One of my main reasons for wanting to give the Stargazer a review was due to the inclusion of a 14k nib.  A pen the size of a Prera, but with a gold nib was intriguing.  As can be imagined, the fine nib writes great and I'm finding that this size nib from Pilot is becoming my sweet spot for the brand.  The lines are so crisp and dark and I have yet to have a problem out of the box with one.

Pilot Stargazer Fountain Pen Review

I have been using the standard Pilot/Namiki blue/black carts lately, but also ran a converter with Shin-kai through it which made for a great experience.  

In Japan, this pen is also called the Stella 90S.  Personally, Stargazer appeals to me more...

Pilot Stargazer Fountain Pen Review

Overall, I really like the Stargazer.  Great nib and solid feel.  There aren't really any negatives, but the only thing I can point out is that it is simply a small pen with a slick surface.  These aren't really "flaws" per se, but are something to consider if you find smaller pens less appealing. 

Pen Chalet has the Stargazer in four different colors.  I decided on the Sapphire (blue, but looks darker than on Pen Chalet's site), but the white is also stunning (almost bought that one).  Give them a look if it caught your eye and fits your hand... 

Vintage Pilot MYU Fountain Pen - 1976 - F Nib

My first step into the world of the vintage Pilot stainless steel lineup was my recent review of the Murex.  Such a neat pen and, frankly, I'm hooked.  Receiving, using, and reviewing the Murex kindled in me a rOtring-esque excitement about all things vintage Pilot steel.  The next pen on my list after the Murex was to acquire a vintage MYU, the predecessor of the Murex. 

The MYU 701 pens were originally produced in 1971 and had a production run all through the 1970's.  The Murex was produced in the late 70's on into the very early 80's and was what many considered an improvement over the MYU due to being larger in size and better for longer writing stints.  The Murex design is far less exciting and captivating than the MYU in my opinion, but they both have their own unique feel and experience and are both an absolute pleasure.

When capped, the MYU is a short, almost pocket sized pen that is lightweight, but sturdy.  Similar to the idea of the Kaweco Sport lineup, the cap plays an important part in the overall functionality of the pen.  Once posted, it extends the pens length to that of a "normal" pen which allows the pen to rest on the fleshy part of the hand rather than being too short.

What makes the MYU stand out in a crowd is how the nib is formed as part of the grip section from a single piece of steel.  This sleek and seamless design against a brushed stainless steel is so striking.  The overall shape of the pen is one continuous curve from the tip to the tail which is incredibly beautiful and I find myself in awe at just how fantastic it is.  I'm sure if the pen could talk it would be embarrassed by my awkward stare while writing...   

The integral nib design in modern pen making is pretty much extinct, although Pilot did a limited edition remake (with some improvement/adjustments) back in 2008 called the M90 or MYU90 for Pilot's 90th birthday.  We can all cross our fingers that in 2018 for the 100th birthday they will do something equally as amazing.

As mentioned above, once I'd received the Murex I was on the hunt to find my first MYU.  Oddly enough, I purchased my pen from a seller on Etsy of all places.  He lives in Japan and seems to always be on the lookout for vintage Pilot pens and he had this particular MYU listed for a great price.  

This specimen is not perfect, but the price was extremely fair for the condition.  The barrel had no dings or dents, but the nib needed some adjusting and the chrome clip and center connector ring were showing some slight signs of oxidation.  

In all honesty, I would usually hold off and try and find a more "pristine" example, but I decided to dive in and I've actually found the slight oxidation against the steel to be a bit appealing.  In discussing the pen with Thomas Hall, he educated me a bit on the Japanese philosophy of Wabi-sabi which is an acceptance of the idea of transience and that things wear, fade, and over time become imperfect.  Very fitting and is something I need to be more considerate of with my things in general.

The nib did write, but was a bit out of alignment so I sent it off for repair to a gentleman named Dillon on Thomas' recommendation.  He recommended Dillon specifically as he has an expertise and the tooling needed to work on pens like the MYU, so I felt safe.  His turnaround time was very quick and he was extremely pleasant to work with.  The pen came back writing great and I'm glad I made the investment to send it off.  If you are in need of service for your MYU, feel free to email Dillon at fpninkvials@gmail.com.

The MYU can accept either the standard Pilot/Namiki cartridges or the CON-20 squeeze converter.  I have to admit that I had never given the CON-20 the time of day, but I decided after a cart or two that I would ink it up with my bottle of Kon-peki using the converter.  The experience was surprisingly easy and it was one of those moments where you feel dumb because you had built up in your mind the experience was going to be subpar, but I will use the converter almost exclusively from this point on.  The only real downside to the CON-20 is your inability to see how much ink you have remaining, but other than that it is great.  For larger Pilot pens I generally use the CON-50.

The nib on the MYU is surprisingly smooth and lays down a nice crisp line.  The F nib is definitely a Japanese fine, but is becoming my preferred size for the brand for everyday writing and note taking.  I love the experience of writing with this pen in both looks and feel.

Along the lines of vintage rOtring pens, the vintage Pilots are quite collectable and can fetch a hefty price for NOS or rarer models like the striped MYU.  If you are serious about wanting a MYU, budgeting around $200 will probably get you one in good shape that you can enjoy.  The nice thing about these is that if you decided it wasn't your thing it will hold its value and there is always a line of buyers looking to pick one up.

Stay tuned for more vintage Pilot reviews to come...

Ti2 TechLiner Pen - Blackwash Edition

The Ti2 TechLiner is the most recent addition to the pen world by Mike Bond of Ti2 Design and was a hit on Kickstarter earlier this year.  Mike was kind enough to send me one of the early prototypes of the TechLiner to review which I really enjoyed.  Something new, unique, and something that took a lot of people by surprise.

In some correspondence recently with Mike, he was kind enough to offer to send me one of the coveted Blackwash edition TechLiners to check out; how could I refuse?  The Blackwash was one of the "upgrade" editions during the Kickstarter campaign and I couldn't wait to get my hands on it to put to work and review.  Thanks again for sending it my way, Mike.

The original finish on the TechLiner is what is considered "tumbled".  It is bead blasted titanium which is then tumbled and provides a really uniform and durable surface that will hold up to a lot of beating.  It looks awesome, very industrial, and fits right in with any EDC.

Now, the Blackwash finish takes awesome to a new level I think.  It is PVD (physical vapor deposition) coated in black and then tumbled to a matte finish.  This finish strapped to a unique titanium pen like Mike's makes for a seriously cool experience.  I dig it. 

For a bit of TechLiner 101, the overall "body" of the pen is made of only three parts: the main barrel, the tip(s), and the cap.  The tip and tail are a sort of rounded off cylinder which have been machined with a grid of lines to create a rectangular grip pattern.  Pretty sweet.  The grooves are deep and just sharp enough on the edges to provide a slip free grip.  

The cap is held in place on both ends by internal magnets which is probably one of the pen's most kick butt features.  The magnets are strong, but not too much.  It is easy enough to pull the cap off, but once on there I have no fear of it falling off and being lost.

The tip of the pen is very unique as the refill sticks out of the barrel to a sharp, needle-like point and is held in place by one of the internal magnets.  This aesthetic might take some getting used to for many people as we are so conditioned to see ballpoint and rollerball type pens only stick out slightly as a little cone.  Not with this one... You might think it would impair the writing experience, but it doesn't in the least.  The TechLiner is built around the popular Uni-ball Signo 207 refill which means you can get it fairly easily in a range of sizes from 0.38mm all the way up to 1.0mm.   

With the Blackwash finish being tumbled, the grip section wears a bit more on the edges of the rectangles which creates a bit of a broken in look.  One thing I noticed about the production model in comparison to the prototype is that the grip was machined to be a bit more defined.  I think this is a good choice as it gives it more of a distinct look and actually increases the grip's functionality.

Before receiving the TechLiner from Mike I had a bit of experience with another "blackwash" product.  My current carry pocket knife is the Leek by Kershaw which is fantastic.  The blackwash finish is what attracted me to get it and I couldn't be happier with the look, feel, and durability the finish has shown.  I was stoked to see this finish on a pen and it lives up to the expectations nicely.

Kershaw Leek Pocket Knife (Photo courtesy of Kershaw website)

Kershaw Leek Pocket Knife (Photo courtesy of Kershaw website)

Another point that is definitely noteworthy in the post is regarding the clip.  First things first, the clip is an optional add-on part which runs another $12, but is probably a sound investment if you're looking into getting the pen.  Without the clip, the TechLiner could slip into a notebook pen sleeve or possibly a pocket (although is a fairly long pen).  The additional clip is a tank and is not a chintzy piece of hardware.

I strongly recommend the TechLiner.  It is unlike anything in the market, is made from killer materials, looks cool, the quality is heavy duty, and the finish...well, lets just say it rocks.  

Now that the Kickstarter pledges have all been fulfilled, check out Mike's shop for not only the Blackwash or standard TechLiner, but his original Ti2 pen (awesome as well), and his other cool products.

Thanks again, Mike!