Ystudio Brass Rollerball Pen: Review

A brand that seems to be making its way into some decent press lately (and with good reason) is Ystudio, a small Taiwanese company that began in 2012 with a vision to create products that were more than just "products", but unique artifacts that create purpose in their use.

Works of art made from raw materials like brass, copper, and wood, that promote a desire to be used and appreciated. Their series, "the weight of words", are a variety of writing instruments that may seem somewhat simple (yet quite unique) in design, but are beautifully and meticulously crafted.

The pen I'm reviewing today is my second experience with a Ystudio product and I'm thrilled to provide another more in-depth review as I really enjoyed the first.

I was sent the brass rollerball pen by Kohezi of Amsterdam, a lovely online store that has a curation of goods that fit a very modern and clean aesthetic. I could peruse their selection all day... Please take a moment to visit their shop, and special thanks to them for sending the pen for review.

The rollerball pen is part of "the weight of words" stationery series mentioned above and is made from solid brass, but with some copper accents neatly tucked away at the ends. Being raw brass, the pen is hefty at 1.5 oz, but since the cap doesn't post, the writing section is a comfortable 1.0 oz. 

Almost immediately upon using the pen it has begun to acquire an aging and patina that gives it a worn in look. The barrel and cap are a faceted hexagon shape with rounded, but distinct edges, and the weathering look blend nicely into a unique aesthetic. There are pens that are so simple, but are beautiful in their own way and I feel that Ystudio has created exactly the experience they intended.

Apparently this is version two of this particular rollerball, the first being a threaded cap/barrel, but to remove the cap you simply pull on a pressure fit system. It is snug, but not tight and easy to remove. It is difficult to see up inside the cap as to how this works exactly, but there is a slight ridge on the grip section that "catches" on some sort of o-ring or spring. There is one piece of plastic in the pen, up near the finial inside the cap, but I'm not sure what purpose it serves.

The refill that comes with the pen is a Schmidt Safety Ceramic rollerball which is a great writer and is easily available. It is held in place by a flush copper set-screw in the end of the barrel that can be removed with a coin, or potentially a fingernail if it isn't too snug.

Sometimes you can easily swap out this size of refill with a Pilot G2, Pentel Energel, or other similar gel pen, but upon trying the opening for the tip seems to be too small to allow for more options. But, I can confirm that the Schmidt Fineliner refill fits perfectly if you like a more expressive line.

I have to admit, a pen like this makes you want to use it which says a lot in my opinion. Not only for what it is doing while writing, but just the act of using it is enjoyable.  

The Ystudio rollerball pen runs around $100 which I feel is a fair value for the pen as it is unique and very well made. I've paid similar amounts for other brass pens like this and don't find the price outrageous.

Special thanks again to Kohezi for sending the rollerball my way to share. In addition to the rollerball version of the Ystudio pen, they also have a wide range of other pen/pencil types to fit other preferences.     

TiScribe-Pencil Review - Brass

Back on Kickstarter is a new project from Kelvin of Urban Survival Gear called the TiScribe-Pencil, an all metal, hefty, and durable mechanical pencil to fit the rest of the TiScribe line-up.

Kelvin was kind enough to send me a sample prototype version for review, so many thanks for providing an opportunity for a hands on look.

*Note - While Urban Survival Gear is a current site sponsor of The Clicky Post during his campaign, my review of the product will be honest and objective. 

The TiScribe-Pencil is an obvious and well designed pairing with another of his recent projects, the TiScribe-Bolt which shares the same overall shape, size, and clip. I've been following Kelvin's work for a couple of years now and it has been fun to see his products evolve/enhance overtime.

Above is a "family photo" of a series of pens he's created which all share a common aesthetic, with the pencil being on the far right.

With any machined pen/pencil, the first thing I did (don't we all?) is take it apart to look at the internal mechanism to see how it worked.

The pencil mechanism inside is made by Schmidt, a company that produces many of our favorite pen refills, pen parts, and apparently mechanical pencil parts as well.

What I like about this mechanism is that the tip threads into the tip of the pencil itself which ensures a snug, tight writing experience. The click to extend the lead isn't really a "click", but more of a smush with some sound/feedback, but you can tell when it is working. More of the sound seems to come from the metal parts coming together vs the mechanism.

The tip of the pencil mechanism does not retract, so it will always be visible. Although, it has a somewhat lower profile being a conical tip vs other pencils (take the rOtring 600 for example) that have a permanently protruding pipe that is prone to catching on things or bending.

Still, it works great and as designed and pushes close to 2-3mm of lead per click. The provided model is a 0.7mm lead width. 

To make the click happen, rather than using a knock at the end of the pencil like most, he turned the clip of the pencil into the "clicker" that extends the lead. A cool design that helps to maintain the consistent look shared with the bolt pen.

The edge of the top of the clip does have a bit of a sharp corner and if there is a piece of feedback about comfort, this would be where it is for me. I spend a lot of time in a wood shop for my Dudek Modern Goods brand so my hands are used to rough surfaces, but I did find the edge of the click to be a bit sharp during use.

Not sure if there is a good solution to this without potentially reshaping the clip, or maybe just softening that edge a bit more. I did find that alternating from a top click approach to more of a side click approach did work and resolve the issue, but wasn't the natural way of going about it.

The mechanism on his bolt pen uses the same process, but it hasn't been something I've noticed I think due to the fact that the spring tension seems less.

As mentioned, this version of the pencil is made from brass and weighs in around 1.3 oz (not a total heavy weight) in comparison to his titanium bolt pen that comes in at 0.8 oz.

The pencil is also a comfortable length of roughly 5.75" which is in line with most retractable pens/pencils. If I were being super picky, I'd say it could be about 1/2" shorter to be the perfect length for my hand, but that is just me being a diva. It feels great and well balanced in the hand.

Branding on the pencil is subtle, merely a small etching on the clip of the Urban Survival Gear logo. There is an engraved logo on the finial of the pencil, but I believe Kelvin mentioned these will likely be omitted during final production.

I really enjoy the products that Urban Survival Gear puts out and I think Kelvin did a fantastic job in creating a well executed pencil to go alongside his recent popular pen. If you enjoy mechanical pencils, definitely give his Kickstarter project a look.

Thanks again to Urban Survival Gear for providing the pencil for review! 

Aurora 88 Demonstrator Fountain Pen

Aurora is a brand that has seemed to take the community by storm as of late. It seems we're always hearing about new special editions and models which no doubt is helping them become more of a household name.

A sort of flagship of the brand is a model called the "88" which has seen numerous variations and limited editions. One of these said variations is simply called the 88 Demonstrator, which is what I'll be reviewing today. 

I was kindly loaned this pen for a review by Pen Chalet, so many thanks to them for sending it my way.

The 88 Demonstrator is a full-size, piston mechanism fountain pen that is, quite honestly, a stunner, but not in the traditional way. No fancy acrylics or textures, but the overall aesthetic is a bit edgier than your average demonstrator pen.

The style of the pen gives me a bit of a "space" vibe, like some sort of futuristic capsule. Against the clear acrylic pieces Aurora chose black hardware which I think was a fantastic choice which only adds to the appeal.

There are small details like how the pieces on the piston and finial connect together on the cap and barrel in a sort of gear pattern which looks cool.

I inked the pen up with some Bungbox blue ink and the piston was smooth and and worked easily. The pen comes with a black, PVD coated 18k nib which writes extremely stiff, like a nail, and is definitely on the dry side.

But, I don't necessarily think that is a bad thing for the right person. For me personally, I do tend to prefer nibs that have some slight softness, but I found it to be enjoyable to use. It made the lines of my writing crisp and clean in my Leuchtturm1917 (preferred) notebook.

I found the nib has tended to burp/splash ink into the cap quite a bit, but I'm not sure if this is a consistent thing with Aurora pens in general.

One of the most noticeable things about the 88 is how solidly built it is. It doesn't feel cheap and doesn't feel flimsy. Unfortunately some acrylic pens do. Another pen that surprised me like this was the Pilot Custom Heritage 92 when I reviewed it awhile back.

The biggest catch on this pen is the price unfortunately. Coming in at a retail price of over $1,000, it is a bit steep to get your hands on one.

Is this price unreasonable? Honestly, any pen that starts to clear the $300-400 range in my opinion has a price to value ratio that is completely subjective. So, for the right person with the right budget, this pen is unique, sturdily built and may be completely reasonable.

While this pen may be a bit out of reach for most of us, if you've been meaning to try an Aurora pen there is a pretty broad range of models/prices to check out and Pen Chalet.

And, special thanks again to Pen Chalet for sending the pen to review!