Liking Pens Part I: Hobby or Obsession?

At some point in the life of a pen fanatic they may have to ask themselves: "Have I taken this too far?"  or "Is this healthy?"  I suppose this depends on what level of "addict" you are (or are in denial about), but could be a real issue.

I'm going to let you all in on a little secret: I really, really like pens.  A lot.

Some people like cars, knives, baseball cards, watches, sports teams (or some combination of all), but pens are my deal.  I know I am completely stating the obvious by saying this, but sometimes figuring where you're at is important from time to time.  

Being a pen blogger I find myself spending a lot of time looking at pens, buying pens, trying new pens, listening to podcasts about pens and, in general, just thinking about pens.  From a "normal" outsider perspective, I'm sure I am completely insane or at least it would appear so.

My enjoyment around pens is difficult to pin down or to find the "why".  One thing I do know is that I enjoy the experience of writing, seeing my handwriting on paper, enjoying the design and feel of the pen that someone has created, and even seeing the ink dry (in fountain pens mainly) as it transitions from its wet color to its dry color.  Did you ever think you'd hear someone say they enjoy the sight of ink drying?  For goodness sakes, I am crazy...  

A trend I seem to see with myself is that when I find a brand or type of pen that really fascinates me I tend to become a bit obsessed.  I research their history, look up all of the different models, read what others have to say about them, look at photos, and often end up buying several models to try.  "But, Mike," you may say, "that doesn't seem so bad."  As it is all in education, right?  Hopefully!

The problem that has progressed over time with this is that I end up with a lot of pens I've bought and then I end up parting with some although usually not at the rate of purchase... this means I have a lot of pens.

In some recent correspondence with Thomas Hall of the new blog Penucopia (which he could have rightly named, "come here if you want me to help you spend your money..."), I talked about this journey I've been on.  I didn't go too deep into feelings and such, but talked about how at some point pens become somewhat of a commodity.  There isn't really the hunt for which pen is going to be the right one or a selection between 5 similar models.  Its a bit more free spirited than that.  What usually ends up happening is I will eventually buy one of each (which I try to find for good deals as to have a decent resale value if needed), try them all out, and see what ultimately sticks.

The problem with this philosophy is whether I really get the time to spend with pens to tell whether I am giving it a fair shot for the long haul.  One thing I do know is that I seem to like what I like and if I don't find myself reaching for a pen often then there is a good chance it won't be with me into retirement.

Lets take rOtring for example; I love rOtring pens, particularly the knurled 600 series.  In the recent past I bet we could even credit some fluctuations in the vintage rOtring pricing market due to this obsession.  (sorry everyone!)  Do I use rOtring pens everyday?  Nope.  There have even been months that have gone by without having a rOtring inked up.  Does this mean I am ready to jump ship on my rOtring collection?  Not entirely, but it does make me think about whether I need ALL of them.  This is a very utilitarian vs collector/hoarder battle that ultimately is waged inside our minds...  I'm finding that I would be willing to part with pens like my Newton rollerball, some 600 pens I don't think will get much use, or even my Lava collection simply to clean up house so-to-speak.  But, the vintage rOtring pens are still as fascinating to me as they were when I was itching to get my hands on my first although I'm at a point where the attachment to some models isn't quite there.  Ultimately, the brand is here to stay, but I may thin out the herd eventually.

My current obsession is the vintage steel Japanese pens produced by Pilot in the 1970's and into the very early 80's.  I literally can't get enough of these things not necessarily in quantity, although I am on a rOtring-esque path towards figuring them out.  I am fascinated by them just as I was with rOtring which means there will be a lot of posts about them in the coming future I'd imagine.

So, back to the original question: liking pens: hobby or obsession?  I guess this is a very personal thing.  Is the interest an inside, privately held one or is there a dedicated china cabinet in the living room displaying all of our pen boxes and paraphernalia? 

Honestly, I'm not really certain what this post is entirely about.  I'm not certain there is an underlying moral that I am trying to get across, but more so to maybe get a glimpse inside the head of a pen fanatic.

I would like to open this up for discussion and get thoughts if people are willing to share.  How do you see yourself? 

(pics taken from my Instagram feed of some "collections")

 

The Clicky Post Yard Sale - Part II

Hello Readers,

If you recall a few weeks back I held a little "yard sale" of a few pens and I believe they've gotten to all of their respective owners.  

In looking through my collection again I found a few more that I thought I might be willing to part with to those that may be interested.  

Each pen listed is a pen that I purchased myself and was not provided complimentary by any retailer/manufacturer.

Kaweco AC Sport Fountain Pen - Black - BB Nib - (Near Mint) $85

Kaweco ART Sport Ballpoint - Amber Finish - (Near Mint/New) SOLD

Kaweco AL Sport Ballpoint - Raw - (Light Scratches Common to Finish) - $45 

Kaweco Allrounder Fountain Pen - Blue - M Nib - (Near Mint) - SOLD

Kaweco Special Fountain Pen - Black - B Nib (Near Mint) -$75

Pelikan M205 Fountain Pen - White - F Nib - (Near Mint) - SOLD

rOtring 600 Silver Rollerball - (Overall Very Good; shows signs of normal wear) SOLD

rOtring Lava Rollerball - (Near Mint/New) - $195

For domestic/US purchases, USPS Priority shipping would be $5 and for International First Class, $10.  This will likely not cover the full cost, but I like round numbers.  Please let me know which you will need.

If interested in any of these pens or if you have questions, please shoot me a message through the Contact page and we'll work out a PayPal arrangement.  These are first come, first serve!

These have been priced very reasonably and I am not open to price negotiating or haggling, please.... : )

Thanks!

- Mike

Titanium Maxmadco Bolt Action Retractable Pen

Before all of the hype of the Kickstarter scene and the readily available metal pens of today, there was a machinist named Jim Madrid who developed a brand called Maxmadco and created the Maxmadco bolt action retractable pen.  

Was Jim the "first" to do machined pens like this?  Likely not, but he has been doing it for some time now and his brand has clout.  This pen is one I've had my eye on for years and am so excited to finally have my hands on one and to share my thoughts.

With most machined pens the first thing you think of is how rugged and tough they are.  While this is true for most as that is what they are going for, upon seeing the Maxmadco I can't help but think how elegant it looks.  Honestly, it is a work of art.  Super sleek, almost futuristic in design that has a very clean, but commanding presence.

I'm not really sure what took me so long to purchase a Maxmadco, but when I saw that Jim had manufactured a limited run of the pen out of titanium (possibly not to be made again), I figured now was as good a time as any.  It upped the price a bit, but I still took the plunge and am glad I did.  

Traditionally, the Maxmadco bolt action pen has been made from either stainless steel or aluminum.  The stainless version comes in at around 1.75 ounces in weight and the aluminum at 0.75 ounces.  The titanium version comes in between at 1.0 ounces and is about a perfect weight.  Jim has also released a bronze version as well which I'm sure is fantastic.

The Maxmadco next to some titanium counterparts

The pen is smaller than one might expect, or at least the diameter is a bit slimmer than a lot of the machined pens around.  Most are made in the 1/2" or slightly larger, while the Maxmadco comes in at 3/8".  

The main barrel and grip section of the pen are a perfect cylinder without taper which one might think may be a bit uncomfortable or bland, but with the reduced diameter it is perfect.  The tip of the pen is machined to a nice cone which makes for some interesting geometry as well as provides a nice writing experience.

The end of the pen has a sharp and pronounced chamfer (looks fantastic) and carries the Maxmadco logo engraved deeply into the metal.  Seriously, this pen is so slick.

The clip is made of steel and surprised me at how strong and sturdy it is despite how thin the metal is.  It has flex, but I don't fear that it will bend out or wear over time.  Its look, shape and design mesh so well with the fit and finish of the pen.  

The clip is affixed to the pen with two stainless steel torx screws.  These screws are domed which minimizes distraction from the overall design and sleekness of the pen.

The biggest question: how does the bolt action feel?  Fantastic.  To extend and retract the tip of the pen is so smooth and is almost effortless.  There is a springiness to the bolt action that seems to catch at a certain point to take over for you.  You have to use your thumb to simply get it past the edge of the flange and the spring finishes the job.  This makes for a really great experience and ease of use.

The pen takes a "Parker style" refill which allows for quite a few options: Quink, Parker Gel, Fisher Space, Schmidt EasyFlow, etc.  Jim has started including the Itoya gel in a 0.7mm needle which is actually quite good.  This was my first experience with this brand of refill and I was pretty impressed.  I will likely keep a fine, blue Fisher refill or a Schimdt EasyFlow 9000 in there as they are my go-to Parker styles.

 I really can't say enough about the Maxmadco.  I had built up its greatness in my mind prior to buying and can honestly say that I have not been let down in the least.  The machining is fantastic, the design is exquisite, the feel is great, and it also supports a small business which I'm all about.  

In the machined pen world the Maxmadco is up there in price a ways, but not outlandishly so and I feel it is worth it.  If you're in the market for a new machined pen I'd put some heavy consideration on this one.